Air De Ector Installation / Removal - Pacific energy BRISTOL Installation And Operating Instructions Manual

Figure 61: Baf e mount screw location.
3. Repeat step 2 to remove second side panel.
4. Remove back panel by tilting the top forward and then pull out of replace
Installation
Position the air de ector in the replace as seen in (Figure 62) and secure with two screws using a screwdriver.
Removal
Remove the two screws seen in (Figure 62) using a screwdriver, and remove the air de ector from replace.
Figure 62: Air de ector.
BRSL.BODYB
050216-44
BDFD.BODYB
Air Deflector Installation / Removal
Figure 60: Removing baf e.
33
5055.633-B