Pacific energy BRISTOL Installation And Operating Instructions Manual page 29

Figure 46: Burner hold down screw location.
Figure 47: Removing upper baf e.
Figure 49: Removing side rebox panel.
BRSL.BODYB
050216-44
BDFD.BODYB
Figure 48
Removing the Burner and Burner tray.
1. Remove the screw holding the burner to the burner
tray (Figure 46).
2. Remove two screws from the upper baffle and
remove (Figure 47)
3. Remove four screws from the burner plate (Figure
48) and remove.
4. Remove the side and rear rebox panels (Figure 49
and Figure 50). Note: The two side rebox panels
hold the rear rebox panel in place.
5. Support the rear rebox panel as the side panels
are being removed.
Figure 48: Removing burner plate.
Figure 50: Removing rear rebox panel.
29
Figure 49
Screws
5055.633-B