Remote Flame Control; Room Thermostat (Transmitter Operation) - Pacific energy BRISTOL Installation And Operating Instructions Manual

Remote Flame Control

The Pro ame has six (6) ame levels. With the
system on, and the ame level at the maximum in
the appliance, pressing the down arrow key once will
reduce the ame height by one step until the
turned off.
The Up Arrow Key will increase the ame height each
time it is pressed. If the Up Arrow Key is pressed
while the system is on but the ame is off, the ame
will come on in the high position (Figure 9). A single
"beep" will con rm reception of the command.

Room Thermostat (Transmitter Operation)

The Remote Control can operate as a room thermostat. The thermostat
can be set to a desired temperature to control the comfort level in a room.
To activate this function, press the Thermostat key (Figure 1). The LCD
display on the transmitter will change to show that the room thermostat
is "ON" and the set temperature is now displayed (Figure 10). To adjust
the set point, press the up or down arrow keys until the desired set point
temperature is displayed on the LCD screen of the transmitter.
5055.633-B
ame is
Flame level Max
Flame level 1
10
Flame level 5
Flame Off
Figure 9: Flame level control.
Room Temperature
Set Temperature
Figure 10: Room temperature control.
050216-44
BRSL.BODYB
BDFD.BODYB