Glass Burner Kit Installation/Removal - Pacific energy BROADWAY GBWY.BODYA Installation And Operating Instructions Manual

Air Deflector Installation / Removal
Installation
Position the air deflector in the fireplace as seen in
figure 38 and secure with two screws using a
screwdriver.
Removal
Remove the two screws seen in figure 38 using a
screwdriver, and remove the air deflector from
fireplace.
Burner Tray Installation / Removal
Installation
Place the burner tray in the fireplace and secure with
4 screws using a screwdriver, as seen in figure 39.
Removal
Remove the 4 screws seen in figure 39 using a
screwdriver, and remove the burner tray.
Glass Installation
To install the glass, evenly spread a thin layer of
crushed glass across the entire burner pan as seen
in figure 40. Ensure glass does not cover pilot.
Rock Installation (Optional)
To install the optional rock set, place rocks making
sure no rocks are in the flame when the unit is
operating. Do not cover air openings.
Figure 41: Glass Burner Kit
Glass Burner Installation /
Removal
Figure 39:Glass Burner Tray
Figure 40: Glass Installation
Figure 42: Rocks Installation
27
INSTALLER
INFORMATION
Figure 38: Air Deflector