Pacific energy BRISTOL Installation And Operating Instructions Manual page 31

Figure 55: Removing blower fan.
need to disconnect any of the electrical or gas ttings.
9. The fan is located inside the opening and toward the rear of the rebox. A 3/8" nut holds the fan
assembly onto a threaded post. Remove the nut and gently extract the fan assembly from the re
box (Figure 55). Be careful not to accidentally catch any other wires while the fan is being extracted.
10. Disconnect the two power wires (Figure 56) before fully extracting the fan from the
opening.
11. Installation is reverse of removal. Return the media to its proper place according to by referring to the
appropriate section of this manual.
BRSL.BODYB
050216-44
BDFD.BODYB
Figure 56: Blower fan.
31
5055.633-B