Touch Characteristics; Optical Characteristics; Environment Characteristics; Mechanical Characteristics - Advantech IDK-121R-42XGA1 User Manual

5.1

Touch Characteristics

This touch panel is a resistance type used with flat LCD type displays. Once touched
by stylus or finger, it sends coordinate points to PC from the voltage changes at the
contact point.
5.2

Optical Characteristics

Item
1 Transparency
2 Haze
5.3

Environment Characteristics

Item
1 Operation temperature
2 Storage temperature
3 Operation humidity
4 Storage temperature
5.4

Mechanical Characteristics

Item
1 Hardness of surface
2 FPC peeling strength
3 Operation force
5.5

Electronic Characteristics

Item
1 Rated voltage
2 Resistance
3 Linearity
4 Chattering
5 Insulation resistance
IDK-1112R User Manual
Specification
80%  3%
8.0%  3%
Specification
° °
-20 C ~ 70 C
° °
-40 C ~ 80 C
20% ~ 80%RH
20% ~ 90%RH
Specification
Pencil hardness 3H.
1) 5N (5N Min.)
2) 19.6N (19.6N Min.)
Pen 0.05N~1.96N
(5~200gf)
Finger
Specification
DC 7V max.
 
X axis: 200 ~ 500 (Glass side)
 
Y axis: 200 ~ 800 (Film side)
X 1.5% (Figure as below)
Y  1.5% (Figure as below)
 15ms
 
0M min (DC 25V)
22
Remarks
BYK-Gardner
BYK-Gardner
Remarks
Note: All terms under 1 atmo-
sphere
Remarks
JIS K-5600-5-4
150gf, 45 degree
1) Peeling upward by 90°
2) Peeling downward by 90°
Dot-Spacer
Within "guaranteed active area",
but not on the age and Dot-
Spacer.
Remarks
FPC connector
Reference: 250gf