Pin diagram for USB and serial connector, J1/J6, as viewed from connector mating
surface.
6.2.5
Touch Screen Connector, JP2, Pins and Signal Descriptions
Touch screen connector, J2(J4 for MTC7000C), is a dual row by five-position header
with 0.025-inch square pins spaced on 0.100 centers. 5W sensor must be connected
to the upper row of the connector. 4W sensor must be connected to the low row of
the connector. The pins are numbered as shown in the figure.
Pin diagram from touch screen connector, J2(J4 for MTC7000C), as viewed from
connector mating surfaces
6.3
Physical Dimensions
MTC7000C Touch Control Board (Unit: mm)
IDK-1112R User Manual
28