Table of Contents
Advertisement
5.1
Touchscreen (Optional: for IDK-2108R Only)
5.1.1
Touch Characteristics
The touch panel is a resistance type that the customer uses with flat display like an
LCD. Once the operator touches it using a resin pen with a round end or a finger, the
circuit for the touch panel sends its coordinate points to the PC reading voltages at
the contact points.
5.1.2
Optical Characteristics
Item
1
TRANSPARENCY
2
HAZE
5.1.3
Environmental Characteristics
Item
1
Operational temperature
2
Storage temperature
3
Operational Humidity
4
Storage temperature
5.1.4
Mechanical Characteristics
Item
1
Hardness of surface
2
FPC peeling strength
3
Operational force
5.1.5
Electronic Characteristics
Item
1
Rated Voltage
2
Resistance
3
Linearity
4
Chattering
5
Insulation
Resistance
IDK-2108 User Manual
Specifications
82.5% Typ. 80% Min. (Active area)
(Inside of guaranteed active area)
8.0% Typ. (Anti-glare)
Specifications
-5°C ~ 60°C
-30°C ~ 70°C
20% ~ 90%RH
10% ~ 90%RH
Specifications
Pencil hardness 3H.
1) 5N (5N Min.)
2) 19.6N (19.6N Min.)
Pen
0.05N~1.96N
(5~200gf)
Finger
Specification
DC 7V max.
X axis: 200Ω ~ 1000Ω(Glass side)
Y axis: 100Ω ~ 800Ω(Film side)
±1.5%max initial value
±2.0%max (after environmental & life test)
20ms Max
At connector pin
10MΩ @ (DC 25V)
10MΩ min (DC 25V)
20
Remarks
JIS K-7105
JIS K-7105
Remarks
Max. wet temp is 38°C
(No dew)
Remarks
JIS K-5600-5-4
150gf, 45 degree
1) Peeling upward by 90°
2) Peeling downward by 90°
Dot-Spacer
Within "guaranteed active
area", but not on the age and
Dot-Spacer.
Remarks
FPC connector
Reference: 250gf
Advertisement
Table of Contents
