Touch Characteristics; Optical Characteristics; Environmental Characteristics; Mechanical Characteristics - Advantech IDK-1115R-40XGC2E User Manual

5.1

Touch Characteristics

5-wire analog resistance type touch panels are used with flat displays like LCDs.
Once touched by stylus or finger, the circuit sends coordinate points to the PC from
voltage contact points.
5.2

Optical Characteristics

Item
1 TRANSPARENCY
2 HAZE
5.3

Environmental Characteristics

Item
1 Operation temperature
2 Storage temperature
3 Operation Humidity
4 Storage temperature
5.4

Mechanical Characteristics

Item
1 Hardness of surface
2 FPC peeling strength
3 Operation force
5.5

Electronic Characteristics

Item
1 Rated Voltage
2 Resistance
3 Linearity
4 Chattering
5 Insulation Resistance
IDK-1115R User Manual
Specification
±
80% 3%
±
8.0% 3%
Specification
° °
-20 C ~ 70 C
° °
-40 C ~ 80 C
20% ~ 80%RH
20% ~ 90%RH
Specification
Pencil hardness 3H.
1) 5N (5N Min.)
2) 19.6N (19.6N Min.)
Pen 0.05N~1.96N
(5~200gf)
Finger
Specification
DC 7V max.
Ω Ω
X axis: 200 ~ 500 (Figure as below)
Ω Ω
Y axis: 200 ~ 800 (Figure as below)
≤
X 1.5%(Figure as below)
≤
Y 2.0%(Figure as below)
≤
20ms
≥ Ω
20M min(DC 25V)
20
Remarks
BYK-Gardner
BYK-Gardner
Remarks
Note: All terms under 1 atmo-
sphere
Remarks
JIS K-5600-5-4
150gf, 45 degree
1) Peeling upward by 90°
2) Peeling downward by 90°
Dot-Spacer
Within "guaranteed active area",
but not on the age and Dot-
Spacer.
Remarks
FPC connector
Reference: 250gf