Touch Controller Characteristics; Specifications; Environmental Features - Advantech IDK-1107WR-50WVB1 User Manual

3.1

Touch Controller Characteristics

Advantech ETM-RES05C touch control board is the ultimate combo board. This
touch panel controller provides optimum performance to analog resistive touch pan-
els for 4-wire models. It communicates with PC systems directly using USB and RS-
232 connectors. In addition, the touch panel driver emulates mouse left and right but-
ton functions.
3.2

Specifications

Electrical Features
+5 Vdc/ 100 mA typical, 50mV peak to peak maximum ripple and noise

Bi-directional RS-232 serial communication and USB 1.1 full speed

Report rate of RS-232 is 180 points/sec (max.). USB is 200 points/sec (max.)

Not affected by environmental EMI

Panel resistance of 4-wire resistive model is from 50 to 200 ohm (Pin to pin on

same layer)
Touch resistance under 3K ohm

Serial Interface
EIA 232E (Serial RS-232)

No parity, 8 data bits, 1 stop bit, and 9600 baud (N, 8, 1, 9600)

Support Windows 2000/ Vista/ XP/ 7, Windows CE 5.0/ 6.0/ 7.0, Windows NT4,

Linux, DOS, and QNX
USB Interface
Conforms to USB Revision 1.1 full speed.

If the USB is connected to the controller, the controller will communicate over

the USB, and not the serial port.
Supports Windows 2000/ Vista/ XP/ 7, Windows CE 5.0/ 6.0/ 7.0, Linux, and

QNX
Touch Resolution
2,048 x 2,048 resolution

Response Time
Max. 20 ms

3.3

Environmental Features

Reliability
MTBF is 200,000 hours

Temperature Ranges
Operating: -25 ~ 85 °C (-13 ~ 185 °F)

Storage: -25 ~ 85 °C (-13 ~ 185 °F)

IDK-1107WR-50WVB1 User Manual 18