Touchscreen; Touch Characteristics; Optical Characteristics; Mechanical Characteristics - Advantech IDK-1115WP-45FHA2 User Manual

3.1

Touchscreen

3.1.1

Touch Characteristics

IDK-1115WP series products use projected capacitive (PCAP) touch screens.
3.1.2

Optical Characteristics

Table 3.1: Optical Characteristics
Item
Transparency
Haze
3.1.3

Mechanical Characteristics

Table 3.2: Mechanical Characteristics
Item
Surface Hardness
Cover Lens Thickness
Overall Thickness
Static Load
Controller and Tail Type
FPC Tail Bending Radius
Holding Force for Tail
Top Surface Finish Type
Decoration Lens Artwork
3.2

Touch Control Board

Advantech's IDK-1115WP-45FHA2 projected capacitive touch screen adopts a COB
(Chip on Board FPC) design with EETI EXC80H84 touch controller. An extra touch
control board is required and bundled in this model. This communicates with a PC
directly through USB connectors. This superior design is sensitive, accurate, and
user friendly.
IDK-1115WP-45FHA2 User Manual
Specifications
88±3%
5±3%
Specifications
7H (The hardness test follows up the JIS-5400 Serils industry
standard)
1.9 mm; 0.74 in
2.8 ± 0.20 mm 0.11 ± 0.007 in
500g within 10cm 2 area for 30sec
COB (Chip on Board)
FPC bending 10 times or more by R1mm angle 500g, each
bending 180°
Meet electrical specs after test.
500 g (Peeling at an angle 90° towards the film)
Anti-Fingerprint (water contact angle>105°)
Black border
20