Touch Screen (Optional: For Idk-2112R Only); Touch Characteristics; Optical Characteristics; Environment Characteristics - Advantech IDK-2112 Series User Manual

5.1

Touch Screen (Optional: for IDK-2112R only)

5.1.1

Touch Characteristics

The touch panel is a resistance type that customers use with flat displays like LCDs.
Once an operator touches it, the circuit will send coordinate points to the PC from the
voltage changes at the contact points.
5.1.2

Optical Characteristics

Item
1 TRANSPARENCY
2 HAZE
5.1.3

Environment Characteristics

Item
1 Operation temperature
2 Storage temperature
3 Operation Humidity
4 Storage temperature
5.1.4

Mechanical Characteristics

Item
1 Hardness of surface
2 FPC peeling strength
3 Operation force
5.1.5

Electronic Characteristics

Item
1 Rated Voltage
2 Resistance
3 Linearity
4 Chattering
5 Insulation
Resistance
IDK-2112 User Manual
Specification
80%  3%
8.0%  3%
Specification
-20°C ~ 70°C
-40°C ~ 80°C
20% ~ 80%RH
20% ~ 90%RH
Specification
Pencil hardness 3H.
1) 5N (5N Min.)
2) 19.6N (19.6N Min.)
Pen 0.05N~1.96N
(5~200gf)
Finger
Specification
DC 7V max.
X axis: 200 ~ 500(Figure as below)
Y axis: 200 ~ 800(Figure as below)
X 1.5% (Figure as below)
Y 1.5% (Figure as below)
 15ms Max

20M min (DC 25V)
24
Remarks
BYK-Gardner
BYK-Gardner
Remarks
Note: All terms under 1
atmosphere
Remarks
JIS K-5600-5-4
150gf, 45 degree
1) Peeling upward by 90°
2) Peeling downward by 90°
Dot-Spacer
Within "guaranteed active
area", but not on the edge and
Dot-Spacer.
Remarks
FPC connector
Reference: 250gf