Touch Controller Characteristics; Specifications; Environmental Features - Advantech IDK-121R-42XGA1 User Manual

Mtouch/Chenmtech Co., Ltd MTC7000C touch control board meets latest Restriction
of Hazardous Substances (ROHS) directive. This touch panel controller provides
excellent performance of your analog resistive touch panels for 4/5 wire models. The
touch panel driver emulates mouse left and right button functions and supports the
following.
6.1

Touch Controller Characteristics

6.1.1

Specifications

Electrical Features

Input Voltage: +5Vdc, normal (+4.75~+5.25Vdc) 16MA, typical at +5VDC. Aver-
age power consumption (@ stand by mode) is 0.08W, typical. Supply must be
capable of sourcing 100MA, minimum. Total noise and ripple requirement must
be less than 100mV (p-p) for frequencies below 1MHz, and less than 50mV (p-
p) for frequencies above 1MHz.
Serial Interface

EIA 232E (Serial RS-232), DCE configuration.

No parity, 8 data bits, 1 stop bit, 9600 baud (N, 8, 1, 9600)

Support Windows 2000/ Vista/ XP/ 7, Windows CE 5.0/ 6.0/ 7.0, Windows NT4,
Linux, DOS, QNX
USB Interface

HID-USB model: USB 2.0 Full speed

If the USB is connected to the controller, the controller will communicate over
the USB, and will not communicate over the serial port.

Supports Windows 2000/ Vista/ XP/ 7, Windows CE 5.0/ 6.0/ 7.0, Linux, QNX
Touch Resolution

2,048 x 2,048 resolution
Response Time

Max. 20 ms
6.1.2

Environmental Features

Reliability

MTBF is 200,000 hours
Temperature Ranges

Operating: -40°C ~ 85°C

Storage: -40°C ~ 85°C
Relative Humidity

10% to 90%, RH Non-condensing
Acquired RoHS certificate
Requlatory FCC-B, CE approvals
Dimension: 70 mm x 20 mm x 5 mm
IDK-1112R User Manual 26