The Input Data Format; Sel68 - Advantech IDK-121R-42XGA1 User Manual

Note 1 Input signals shall be in low status when VDD is off.
Note 2 High stands for "3.3V", Low stands for "0V", NC stands for "No Connection".
Note 3 RSV stands for "Reserved".
Note 4 Input signals shall be in low status when VDD is off.
Note 5 If in 6-bit mode, please keep pin 17 & pin 18 NC or make sure that the volt-
age of pin 17 is always higher than the Voltage of pin 18.
3.2

The Input Data Format

3.2.1

SEL68

Note1 Please follow PSWG.
Note2 R/G/B data 7:MSB, R/G/B data 0:LSB
Signal Name
+RED5(R5)
+RED4(R4)
+RED3(R3)
+RED2(R2)
+RED1(R1)
+RED0(R0)
Description Remark
Red Data 5(MSB) Red-pixel Data
Red Data 4
Each red pixel's brightness data consists of
Red Data 3
these 6 bits pixel data.
Red Data 2
Red Data 1
Red Data 0 (LSB)
Red-pixel Data
13 IDK-1112R User Manual