Ricoh D065 Service Manual page 164

MFP Options
3. Insert the file format converter board into Slot A and fasten it with the screws.
4. Switch the machine on.
5. Set SP5836-3 to "1" to enable the print backup feature.
6. Confirm or set the following SP codes with the values in the table listed below.
SP No. Setting
5-836-1
5-836-2
5-836-3
5-836-72
7. Set the following SP codes according to the customer's needs.
SP No. Setting
SP5-836-94
SP-5836-98
D062/D063/D065/D066
SP No.
1 5-836-73
0 5-836-85
1 5-836-86
0 5-836-91
Selects JPEG2000 file format for documents copied from
the document server to Palm2.
2
Note: Files backed up to Palm2 in J2K format cannot be
edited by other software applications.
Selects the TIFF file format for documents copied from the
document server to Palm2.
0
Note: Select this so the backed up files can be used with
other software applications (editing, OCR, etc.) with only
slight loss in image quality.
Applies dot correction and eliminates ghost images
transferred from the back sides of double-sided originals
when files are copied to Palm2. This selection also reduces
the size of the file.
1
Note: This function is applied to both J2K and TIFF files and
is particularly useful for copying large J2K documents
quickly with only a slight loss in image quality.
0 Does not apply the features of the "1" setting when files are
Setting
0
1
2
50
Comment
2-116
Rev. 08/03/2009
SM