Creating A New Job In The Memory Or Copying A Job - EWM Tetrix 351 Operating Instructions Manual

Design and function
Organising welding tasks (Mode "JOB Manager")

5.16.2 Creating a new JOB in the memory or copying a JOB

Copying a pre-defined welding task from the fixed memory (JOBs 1 to 128) to the free memory
(JOBs 129-256):
It is normally possible to adjust all 256 JOBs individually. However, it is a good idea to assign
specific JOB numbers in the free memory (JOB 128 to 256) for specific welding tasks.
Operating Action
element
x x
2 sec.
1 x
1 x
100
Result
Select JOB Manager mode
Select JOB Manager mode
Switch from "Load JOB" to "Copy JOB"
Select the required JOB number using the rotary
transducer (e.g. 150)
JOB has been copied to the free memory, machine
switches back to Display mode. The JOB can be
modified individually.
Display
Press until the "VOLT"
signal light is on
Current value and JOB
number displayed
099-000115-EW501
17.06.2015