Managing Welding Tasks (Job Manager); Copying Welding Tasks (Job); Reset Welding Task (Job) To The Factory Setting; Power-Saving Mode (Standby) - EWM DC Comfort 3.0 Operating Instructions Manual

Functional characteristics

Managing welding tasks (JOB manager)

5.5 Managing welding tasks (JOB manager)
5.5.1

Copying welding tasks (JOB)

Use this function to copy the JOB data of the currently selected JOB to a target -JOB to be specified.
5.5.2

Reset welding task (JOB) to the factory setting

This function resets the JOB data of a welding task (JOB) to be selected to the factory settings.
5.6

Power-saving mode (Standby)

Using the parameter
set or the mode can be deactivated > see 5.10 chapter.
When power-saving mode is activated, the machine displays show the horizontal digit in the
centre of the display only.
Actuating any operating element (e.g., turning a rotary knob) cancels the power-saving mode and the ma-
chine switches back to ready-to-weld mode.
52
2s
Figure 5-39
2s
Figure 5-40
in the machine configuration menu, the time for the power-saving mode can be
4s
4s
099-00T501-EW501
1.2.2023