5.12
TIG welding
5.12.1 Welding torch and workpiece line connection
Equipment damage due to improperly connected coolant pipes!
If the coolant pipes are not properly connected or a gas-cooled welding torch is used,
the coolant circuit is interrupted and equipment damage can occur.
•
Connect all coolant pipes correctly!
•
Completely unroll the hose package and the torch hose package!
•
Observe maximal hose package length - See 5.6 Welding torch cooling system chapter.
•
When using a gas-cooled welding torch, use a hose bridge to establish the coolant circuit -
See 9 Accessories chapter.
Prepare welding torch according to the welding task in hand (see operating instructions for the
torch).
Item Symbol
1
2
099-000115-EW501
17.06.2015
Description
0
Welding torch
Welding torch hose package
CAUTION
Figure 5-19
Design and function
TIG welding
57