Internal Jumpers; Figure 11 Jumper Locations; Table 12 Cf Master/Slave Setting (Jp2); Table 13 Clear Cmos Setting (Jp3) - Quanmax QDSP-1000 User Manual

Chapter 5

Internal Jumpers

Jumper Settings
To ensure correct system configuration, the following section describes how to set the
jumpers to enable/ disable or change functions. For jumper descriptions, please refer
to the table below.
JP3

Figure 11 Jumper Locations

Table 12 CF Master/Slave Setting (JP2)

Table 13 Clear CMOS Setting (JP3)

QDSP-1000/ 1010 User's Manual
31