Figure 1 Q24 / Q48 Front Panel Control, Indicators And Magazines - Qualstar Q48 Installation And Operation Manual

Q24/Q48 Tape Library
Ref. Description
1 Air vents
2 Power button: Pressing the button will initiate a controlled power down of the library (soft power down)
LED <READY> (green): is illuminated during power on; blinking during tape or library media changer
3
activity.
LED <CLEAN> (amber): is illuminated when the tape drive has determined that a cleaning tape should be
4
used. Cleaning is only necessary when the library directs to do so. Additional cleaning is not necessary.
LED <ATTENTION> (amber): is illuminated when the library has detected a condition that requires
5
attention by the operator.
LED <ERROR> (amber): is illuminated when an unrecoverable tape drive or library error occurs. A
6
corresponding error message is shown on the LCD screen.
7 <UP> button [◄]: is used to navigate backward through menu items.
8 <CANCEL> button []: is used to cancel a user action and return to the last menu item.
9 <DOWN> button [►]: is used to navigate forward through menu items.
10 <ENTER> button [↵]: is used to enter to a sub menu or execute an action.
Operator control panel (OCP) consisting of a 128 x 64 pixel screen. The OCP displays actions and status
11
information, menu items or error messages relevant to the operational mode.
12 Right magazine(s)
13 Left magazine with mail slot(s)

Figure 1 Q24 / Q48 front panel control, indicators and magazines

© Copyright QUALSTAR 2015
Installation and Operations Manual
4