Q24/Q48 Tape Library
4. Operations
Move media within the library
Rescanning the media inventory
•
Releasing magazines for removal
•
•
5. Service
Performing a general diagnosis of the library
Determining and updating firmware
•
Reboot of the library
•
Viewing library logs
•
Cleaning tape drive(s)
•
Cartridge memory
•
•
3.2.3
Login
NOTE
To login, select the access type and enter the correct password. There are three levels of access:
Guest - (standard user level – default password std001).
Admin - (administrator user level – default password adm001).
•
Service - (service user level; for access by service personnel only – default password ser001).
•
Each level affects the areas to which you have access and what actions you can initiate in those areas.
•
© Copyright QUALSTAR 2015
Some options of the RMU take the library offline. This inactive
mode can interfere with host-based application software,
causing data loss. Make sure the library is idle before
attempting to perform any remote operations that will take the
library offline.
Figure 30 RMU Login
Installation and Operations Manual
36