Q24/Q48 Tape Library
2.4
Installation Precautions
CAUTION
WARNING
NOTE
© Copyright QUALSTAR 2015
Static sensitive - Risk of damage to devices
A discharge of static electricity damages static-sensitive devices
or micro circuitry.
Proper packaging and grounding techniques are necessary
precautions to prevent damage.
See Section 5.2, Electrostatic discharge
Weight of Q24/Q48 Tape Library - Risk of personal injury
Before lifting a library:
Observe local health and safety requirements and guidelines for
manual material handling.
Remove all tape cartridges to reduce the weight.
Obtain adequate assistance to lift and stabilize the library during
installation or removal.
Risk of damage to devices
When placing a library into or removing the library from a rack:
Extend the rack's leveling jacks to the floor.
Ensure that the full weight of the rack rests on the leveling jacks.
Install stabilizing feet on the rack.
Extend only one rack component at a time.
Do not expose the library to moisture.
Use the library on a firm level surface free from vibration.
Do not place anything on top of the library.
Installation and Operations Manual
11