Q24/Q48 Tape Library
3.2
Remote management unit (RMU)
Many of the same operations performed locally from the operator control panel (OCP) can also be
3.2.1
Overview
performed remotely using the network connected Remote Management Unit (RMU).
The RMU lets you monitor and control the library from any computer connected to your network or
through the World Wide Web (WWW). The RMU hosts a dedicated, protected Internet site that
displays a graphical representation of the library.
After establishing a network connection to the library, open any HTML browser and enter the IP
address of the library. To allow access from the RMU, you must first set the desired static IP address at
the OCP or configure to use DHCP.
The following operations are available through the remote management unit as explained below:
3.2.2
Operations through the RMU
1. Identity
Viewing the static library identity
Viewing the static drive identity
•
Viewing the network identity
•
•
2. Status
Viewing the dynamic library status
Viewing the dynamic drive status
•
Viewing the tape cartridge inventory
•
•
3. Configuration
Changing the system configuration
Changing the logical library configuration
•
Setting the license key
•
Changing the drive configuration
•
Changing the network configuration
•
Changing the SNMP configuration
•
Changing the user password
•
Setting date/time
•
Setting error log mode
•
Setting event for email notification parameters
•
Restoring factory defaults
•
•
© Copyright QUALSTAR 2015
Installation and Operations Manual
35