Qualstar Q48 Installation And Operation Manual page 60

Q24/Q48 Tape Library
This page allows the user to add and modify user accounts.
3.2.7.7 Changing the User settings
Changes that can be made are:
Access Level:
Access Level Name:
•
New Password:
•
Repeat Password:
•
OCP Access PIN Enabled:
•
•
OCP Access PIN Code:
•
Repeat OCP Access PIN Code: Enter the OCP Access PIN Code again.
Support Name:
•
•
Support Phone:
•
Support Email:
•
© Copyright QUALSTAR 2015
Figure 46 User account settings
Choose from 1 (Standard), 2 (Admin), or 3 (Service).
The name associated with the chosen access level.
The password can be a maximum of ten characters.
Enter the new password again.
Select this item, if you would like the Operator Control Panel
display to be password protected.
The password for accessing the OCP when the OCP Access PIN is
enabled; max 4 characters
The name of the individual within your company to contact for
RMU or library support; max 30 characters
The phone number of the individual within your company to
contact for RMU or library support; max 30 characters
The email address of the individual within your company to
contact for RMU or library support; max 30 characters
Installation and Operations Manual
51