Error Message Format; Ocp Error Reporting; Rmu Error Reporting - Qualstar Q48 Installation And Operation Manual

Q24/Q48 Tape Library
4.7.2

Error Message format

The error message format is a fixed 4-byte length with the following content:
• Error type
• Error code
• Sub error code
• Internal code (active command code)
4.7.3

OCP error reporting

In case of an error or a warning, a popup message appears on the OCP. The information is shown in 3
different message displays, as shown in the following example:
1. General <Error> display
Select the <Hint> button
to show the <Hint> display.
4.7.4

RMU error reporting

In case of an error or a warning, the following popup message appears on the RMU. All information will be
available in one message box, as shown in the following example:
© Copyright QUALSTAR 2015
2. <Hint> display
Select the <Detail> button
to show the<Detail> display
Error -> Hint
Check cartridge status by
removing the
corresponding magazine
<OK> <Detail>
Figure 64 OCP Error display
Figure 65 RMU Error display
Installation and Operations Manual
3. Detail display
Error -> Details Error->Details
Error : 8A 65
Initiator : Robotic
Time : 09/01/28 10:55:00
<OK> <Back>
73