Audio Settings; The Floor Mix; Route Microphones To Groups - Shure DCS 6000 User Manual

Audio Settings

The Floor Mix

When a microphone is turned on, the audio is routed to the main mix (Group A) by default. This mix is often referred to as
the floor mix because it transmits the audio from the talker to the rest of the participants in the meeting. Interpreters also
listen to the floor to provide language interpretation for multilingual meetings.
By default, the floor mix is routed to the loudspeaker and headphone output (Channel 0) of each connected microphone
unit.

Route Microphones to Groups

Go to the Group Setup page
For each microphone, select one of the following options:
• Group A only (default)
• Group A + another group
• Group B, C, D, E, F, G, or H
• None
> to view or modify the microphone routing.
Audio Group Setup
39
Assign multiple units at once
Individually assign units to a group