Shure DCS 6000 User Manual page 58

If the CCU inserts the unit into the reply list and it issues
the 'mic_reply_on' command.
Remove a microphone from the reply list
mic_reply_off <seat no><CR>
Remove a microphone from the reply list.
If the CCU removes the unit from the reply list and it issues
the 'mic_reply_off' command.
Clear the reply list
mic_all_requests_off><CR>
Clear the reply list.
The CCU responds by issuing the 'mic_reply_off'
command for each microphone that is removed from the
reply list.
Put a microphone in the request list
mic_request_on <seat no><CR>
Insert a microphone into the request list.
If the CCU inserts the unit into the request list and it issues
the 'mic_request_on' command.
Remove a microphone from the request list
mic_request_off <seat no><CR>
Remove a microphone from the request list.
If the CCU removes the unit from the request list and it
issues the 'mic_request_off' command.
Clear the request list
mic_all_requests_off><CR>
Clear the request list.
The CCU responds by issuing the 'mic_request_off'
command for each microphone that is removed from the
request list.
Set the next microphone on
mic_next_on><CR>
Turns off the first microphone in the speak list and turns on
the first microphone from the request list.
If a microphone is turned off, the CCU issues the 'mic_off'
command.
If a microphone is turned on, the CCU issues the 'mic_on'
command and the 'mic_request_off' command.
Set the maximum number of total speakers
max_total_speakers <max total speakers><CR>
Maximum number of speakers allowed to speak.
<max total speakers> Can be set from "1" to "8"
The CCU issues the 'max_total_speakers' command.
Set the maximum number of delegate
speakers
max_speakers <max speakers><CR>
Maximum number of delegates allowed to speak.
<max speakers> Can be set from "1" to "8"
The CCU issues the 'max_speakers' command.
Set the maximum number of replies
max_replies <max replies><CR>
Maximum number of delegates allowed in the reply list.
<max replies> Can be set from "0" to "250".
The CCU issues the 'max_replies command.
Set the maximum number of requests
max_requests <max requests><CR>
Maximum number of delegates allowed in the request list.
<max requests> Can be set from "0" to "250".
The CCU issues the 'max_requests' command.
Set the Operation Mode
mic_mode <mode><CR>
Set the system operation mode.
<mode> Can be set to "auto" (Automatic), "fifo" (First-in-
first-out), "manual" (Manual) or "vox" (Voice Active)
<mode> Can be set to "auto" (Automatic), "fifo" (First-
in-first-out), "manual" (Manual), "vox" (Voice Active),
"auto+reply" (Automatic+Reply), "manual+reply"
(Manual+Reply) and "vox+reply" (Voice Activate + Reply)
The CCU issues the 'mic_mode' command.
Set the Interrupt Mode
mic_interrupt <mode><CR>
Set the ability to interrupt. Defines, whether microphones
should interrupt or not.
<mode> Can be "Same", "Lower" (microphones interrupt)
or "off" (microphones do not interrupt)
The CCU issues the 'mic_interrupt' command
Set the microphone priority
mic_priority <seat_number>priority><CR>
Set the microphone priority.
<seat_number>: microphone to adjust.
<priority>: desired priority. Possible values: 0 to 5, where
0 is the lowest priority and 5 is the highest priority.
The CCU responds to this command by returning a mic_
priority message.
Retrieve the Microphone Status
mic_status<CR>
58