7.3 Audio Settings
Use the DDS 5900 audio diagram as a reference when
making audio adjustments.
7.3.1 Loudspeaker
7.3.2 Volume
Volume of the loudspeakers can be turned down to
accommodate quieter installations. The attenuation setting
applies all connected discussion units in the system.
• Browser Interface:
>
>
Audio
Loudspeaker Control
Loudspeaker Volume
• CU:
>
Loudspk. control
Loudspk. volume
7.3.3 Audio Source
Group A is always used as the source for the discussion
unit loudspeakers. By default, all discussion units are
routed to this group.
Removing a Discussion Unit
Deselect Group A to remove a discussion unit microphone
from the loudspeaker bus. Go to
>
>
Audio
Audio Output
Group Setup
Tip: Adjust several microphones at once using the
dropdown arrow next to Group Setup.