Audio Settings - Shure DDS 5900 User Manual

Audio Settings

The Floor Mix
When a microphone is turned on, the audio is routed to the main mix (Group A) by default. This mix is often referred to as the
floor mix because it transmits the audio from anyone participating in the meeting. Interpreters also listen to the floor to provide
language interpretation for multilingual discussions.
By default, the floor mix is routed to the loudspeaker and headphone output (Channel 0) of each connected microphone unit.
Route Microphones to Groups
Go to the Group Setup page Audio > Group Setup to view or modify the microphone routing.
For each microphone, select one of the following options:
• Group A only (default)
• Group A + another group
• Group B, C, D, E, F, G, or H
• None
Add Participant names
Shure Incorporated
40/81