Audio Source For The Loudspeaker And Headphones - Shure DCS 6000 User Manual

Audio Source for the Loudspeaker and Headphones

By default all microphones are routed to loudspeaker and headphone mixes.
To change the audio source:
1. Route microphones to
2. Select the audio sources for the loudspeaker and Channel 0 (headphone)
• Floor (default)
• Audio In 1
• Audio In 2
to add them to the floor mix (all selected by default)
Group A
Group A = Floor
Audio
Loudspeaker
Headphone
41
>
Audio Group Setup
> :
Input Control