Interrupt Mode - Shure DCS 6000 User Manual

Example Settings
Chairman (Moderator) Can Speak At Any Time
Set the total number of speakers to one (1) higher than the maximum number of participants. If there are two chairmen,
set the number to two (2) higher.
Using FIFO Mode
First In, First Out (FIFO) mode automatically turns on microphones based on a chronological queue list. This mode works
best if the maximum number of participants is set to one (1), so that the participant must wait to speak until the other is
finished.

Interrupt Mode

This mode determines the behavior of the microphone units when the speaker list is full.
Go to >
Operation Operation Mode
• Not Allowed: A participant unit cannot turn on the microphone until a space is available in the speaker list.
• Lower (default): A participant with a higher speak priority (typically a chairman) can turn on the microphone even when
the speaker list is full. This turns off the microphone of the participant that has been in the list the longest (at the bottom
of the Speaker List).
• Lower + Same: A participant can turn on the microphone even when the speaker list is full. This turns off the
microphone of the participant that has been in the list the longest (at the bottom of the Speaker List) and with an equal
or lower priority setting.
Participants are automatically provided a speaker priority based on their role:
• Chairman: 5
• Delegate: 1
To manually adjust the priority number, go to
When Speak Interrupt is set to Lower + Same, a participant that turns on their microphone will override the last
> to select from the following options:
Speak Interrupt Mode
Configuration
Removed from the list
Speaker List with a Maximum of 3 Speakers
person in the speaker list.
> and select a number from the priority column.
Participant Setup
50