Audio Settings - Shure DDS 5900 User Manual

System Set Up

Audio Settings

The Floor Mix
When a microphone is turned on, the audio is routed to the main mix (Group A) by default. This mix is often referred to as
the floor mix because it transmits the audio from anyone participating in the meeting. Interpreters also listen to the floor to
provide language interpretation for multilingual discussions.
By default, the floor mix is routed to the loudspeaker and headphone output (Channel 0) of each connected microphone
unit.
Route Microphones to Groups
Go to the Group Setup page > to view or modify the microphone routing.
Audio Group Setup
For each microphone, select one of the following options:
• Group A only (default)
• Group A + another group
• Group B, C, D, E, F, G, or H
• None
Assign multiple units at once
Individually assign units to a group
53