Adding The License To The Dis-Ccu - Shure DCS 6000 User Manual

Adding the License to the DIS-CCU

After purchasing the license file, upload it to the unit using the DIS-CCU web interface:
1. Save the license file (.xml extension) to the computer or USB drive.
2. Connect the DIS-CCU and open the web interface. Sign in as the
been set.
3. Go to the page (
License
Before the license is loaded to the system, only the DDS 5900 mode is available
4. Select to locate the license file.
Browse
5. Select to install the file to the DIS-CCU. The unit will reboot.
Go
The features are listed at the top of the web page and the mode is selectable for
operation with the DDS 5900 or DCS 6000 system.
> ).
System License
License Page without Upgrades
After Installing the License File
if a password has
Admin
9