General Notes; Applicability - Vermeiren Eclips+ Instruction Manual

Hide thumbs Also See for Eclips+:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
ECLIPS + 30°
Length (without leg supports)
Length (with leg supports)
Height
Height (B14 back extension included)
Width of the seat
Total width (depends on seat widths)
Seat depth
Height of seat
Height of backrest
Height of armrests (seat cushion)
Height of armrests (floor cushion)
Weight (armrests/leg supports included)
Nominal load (max. load)
Gas pressure spring
Tyre pressure, steering wheels
Tyre pressure, rear (driving) wheels
3)
Max. climbing ability
Max. obstacle height
1)
Depends on seat width and tyres and equipment.
2)
Tyre pressure given is for standard pneumatic tyres. If using tyres made by another manufacturer, please refer to the tyre
cover for details of the pressure.
3)
When tyres are in good condition and pressurised, and surface is flat.

GENERAL NOTES

With the lightweight "Eclips+" and "Eclips+30°" wheelchair you have acquired a wheelchair developed
entirely for your comfort. These models are exclusively designed for individual use by disabled
persons for their own conveyance indoors and outdoors as well as by other persons. This wheelchairs
can be adjusted to individual requirements as explained below. Thus please read the instruction
manual carefully to acquaint yourself with your wheelchair.

APPLICABILITY

The wheelchair is intended to be used to transport a person either actively (by using the driving wheel
grips) or passively (propelled by an attendant). The different types of fittings and accessories, and the
modular construction, allow full use by persons disabled by
paralysis
loss of limbs (leg amputation)
limb defects / deformation
stiff or damaged joints
illnesses like heart insufficiencies and poor circulation, balance disturbances or cachexia, and also
for aged persons.
This list does not, in principle, prevent its use in the case of other and/or additional ailments and
disabilities. But in such cases an authorised person should always verify in advance that the product
can be used properly in terms of functionality, safety and technical issues, and that it will not put the
user at risk.
34.25 in. / 35.04 in. / 35.83 in.
46.85 in. / 47.64 in. / 48.43 in.
36.22 in. (for standard seat height of 19.69 in.)
47.24 in. (for standard seat height of 19.69 in.)
15.35
in.
24.02
in.
16.54 in, 17.32 in, 18.11 in
18.11 in. - 20.47 in. (Standard 19.69 in)
17.72 in.
8.66 in.
27.17 in. (with a seat height of 19.69 in.)
1)
starting from about 55.12 lb.
286.60 lb.
2 x 275 N
2)
Max. 2.5 bar
2)
Max. 3.5 bar
10.5 % / 6°
2.36 in.
We reserve the right to introduce technical changes. Measurement tolerance +/- 1.5 cm / kg / °
4
16.54
17.32
18.11
18.90
in.
in.
in.
in.
24.80
25.98
26.77
27.56
in.
in.
in.
in.
Eclips+/Eclips+30°
11/2008
19.69
21.65
in.
in.
28.35
30.31
in.
in.
0
E

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eclips+30

Table of Contents