First of all we want to thank you for putting your trust in us by selecting one of our wheelchairs. The Vermeiren wheelchairs are the result of many years of research and experience. During the development, special attention was given to the ease of use and the serviceability of the wheelchair.
When used on mats, carpeted floors or loose floor coverings, the floor covering can get damaged. Use only Vermeiren approved accessories. The manufacturer is not liable for damage caused by the lack of or improper service or as a result of not following instructions from this manual.
Storage and use temperature + 5 ° C + 41 ° C Storage and use humidity We reserve the right to introduce technical changes. Measurement tolerance ± 15 mm / 1,5 kg / ° Table 1: Technical specifications Eclips XXL Page 4...
14 = Seat 15 = Double cross 16 = Identification plate Accessories The following accessories are available for the Eclips XXL: • Anterior pelvic belt (B58) for mounting on the tubes of the back • Anti-tipping device (B78) for mounting on the bottom frame •...
Eclips XXL 2013-04 Safety rules To prevent injury and/or damage to your wheelchair, make sure that no objects and/or body parts are caught in the spokes of the driving wheels. The parking brakes should be applied before getting into and out of the wheelchair. The parking brakes should be applied when adjusting/mounting the backrest, arm supports, ...
Eclips XXL 2013-04 Unfolding the wheelchair L L L L CAUTION: Risk of clamping – Keep fingers away from moving parts of the wheelchair. Position yourself behind the wheelchair. Use the hand-grips to open the wheelchair as much as possible.
Eclips XXL 2013-04 To apply the brakes: Push the brake handles forward till you feel a distinctive click. L L L L CAUTION: Risk of unintended movement – Make sure the wheelchair is on a flat horizontal surface before releasing the brakes.
Eclips XXL 2013-04 To open and remove the arm support: Pull lever and pull the front of the arm support upwards. (Fig C) Fold the arm support backwards. To remove the arm support, pull the rear of the arm support from tube hood...
Eclips XXL 2013-04 Riding the wheelchair L L L L WARNING: Risk of clamping – Prevent your fingers from being caught by the wheels spokes. L L L L WARNING: Risk of clamping – Be careful passing through restricted passages (e.g.
Page 13
Eclips XXL 2013-04 An experienced user can negotiate higher curbs by himself. This is best done backwards. Turn the wheelchair to have the rear wheels facing the curbs. Lean forward to move your centre of gravity forward. Move the wheelchair close to the curbs.
Eclips XXL 2013-04 2.11 Fold up the wheelchair L L L L CAUTION: Chance of pinching – Do not place fingers between the components of the wheelchair. When the pushbar is available, remove the pushbar. Remove the footrests (see § 2.3).
The Vermeiren Lightweight wheelchairs Eclips XXL has been designed entirely for your comfort. This wheelchair can be adjusted to individual requirements as explained below. To find a service facility or specialist dealer near you, contact the nearest Vermeiren facility. A list of Vermeiren facilities can be found on the last page.
Eclips XXL 2013-04 Anatomical seat L L L L WARNING: Risk of injury – Check that the seat is firmly secured before use. Check that the screws are not damaged. L L L L WARNING: Risk of injury – Avoid getting your fingers caught during the assembly process (between seat and cross-hinge).
Position 1: hole 1 and 3 Position 2: hole 2 and 4 Position 3: hole 3 and 5 Tighten the screws properly (Fig A) Maintenance For the maintenance manual of the wheelchairs refer to the Vermeiren website: www.vermeiren.be. Page 15...
Page 18
Dealer´s stamp: Dealer´s stamp: Date: Date: Dealer´s stamp: Dealer´s stamp: Date: Date: Dealer´s stamp: Dealer´s stamp: Date: Date: • For service checklists an additional technical information, please see our specialist dealers nearest to you. More information on our website at: www.vermeiren.com.