About This Guide; Who Should Use This Guide; How To Use This Guide - Extreme Networks ExtremeWireless AP3935i Installation Manual

The guide describes how to mount and connect cables to the ExtremeWireless AP3935 access
point. In addition, this guide provides information on the product certifications and national
approvals for the AP3935 access point.

Who Should Use This Guide

How to Use This Guide

Read through this guide completely to familiarize yourself with its contents and to gain an
understanding of the features and capabilities of the AP3935 access point. A general working
knowledge of data communications networks is helpful when setting up this product.
This preface provides an overview of this guide, defines the conventions used in this document,
and instructs how to obtain technical support from Extreme Networks. To locate information
about various subjects in this guide, refer to the following table.
For...
An overview of the AP3935 features.
Instructions to mount the AP3935, connect cables, and
connect power. Instructions are also included to mount and
connect the optional Power Supply.
Specifications, environmental requirements, and physical
properties of the AP3935 and optional Power Supply.
Regulatory certifications and national approvals.
NOTE
This guide does not provide information on configuration of the access points.
For information on how to configure the access points, see the ExtremeWireless
User Guide.
WARNING
Electrical Hazard: Only qualified personnel should install or service this unit.
Riesgo Electrico: Nada mas personal capacitado debe de instalar o darle servicio a esta
unida.
Elektrischer Gefahrenhinweis: Installationen oder Servicearbeiten sollten nur durch
ausgebildetes und qualifiziertes Personal vorgenommen werden.

About This Guide

Refer to...
Chapter 1, Introduction
Chapter 2, Installation
Appendix A, Specifications
Appendix B, Regulatory Information
ExtremeWireless™ AP3935 Installation Guide v