Fcc Rf Radiation Exposure Statement; Canada; Industry Canada Compliance Statement - Extreme Networks ExtremeWireless AP3935i Installation Manual

FCC RF Radiation Exposure Statement

The ExtremeWireless AP3935 complies with FCC RF radiated exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating instructions for satisfying
RF exposure compliance. This device has been tested and has demonstrated compliance when
simultaneously operated in the 2.4 GHz and 5 GHz frequency ranges. This device must not be co‐
located or operated in conjunction with any other antenna or transmitter.
The radiated output power of the ExtremeWireless AP3935 is below the FCC radio frequency
exposure limits as specified in "Guidelines for Human Exposure to Radio Frequency
Electromagnetic Fields" (OET Bulletin 65, Supplement C). This equipment should be installed and
operated with a minimum distance of 25 cm between the radiator and your body or other co‐
located operating antennas.

Canada

Industry Canada Compliance Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus as set out in the interference‐causing equipment standard entitled "Digital Apparatus,"
ICES‐003 of Industry Canada.
Cet appareil numerique respecte les limites de bruits radioelectriques applicables aux appareils
numeriques de Classe B prescrites dans la norme sur le materiel brouilleur: "Appareils
Numeriques," NMB‐003 edictee par le Industrie Canada.
This device complies with RSS‐247 of the Industry Canada Rules. Operation is subject to the
following conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause
undesired operation.
• This Class B digital apparatus complies with Canadian ICES‐003.
• Operation in the 5150‐5250 MHz band is only for indoor usage to reduce potential for harmful
interference to co‐channel mobile satellite systems.
• Users are advised that high power radars are allocated as primary users (meaning they have
priority) and can cause interference in the 5250‐5350 MHz and 5470‐5850 MHz bands of LE‐
LAN devices.
• For the product available in the Canadian market, only channels 1 to 11 can be operated.
Selection of other channels in the 2.4 GHz band is not possible.
• Under Industry Canada regulations, this radio transmitter may only operate using an antenna
of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To
reduce potential radio interference to other users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that
necessary for successful communication.
Ce dispositif est conforme à la norme CNR‐210 dʹIndustrie Canada applicable aux appareils radio
exempts de licence. Son fonctionnement est sujet aux conditions suivantes:
• Le dispositif ne doit pas produire de brouillage préjudiciable.
• Ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de
provoquer un fonctionnement indésirable.
• Ce dispositif est conforme à la norme NMB‐003 edictee par le Industrie Canada.
ExtremeWireless™ AP3935 Installation Guide 27