Chapter 1: About This Guide; Documentation Set; Document Conventions - Extreme Networks Altitude 4000 Series Reference Manual

1
C H A P T E R
This guide provides information on using the Extreme Networks access point software to manage
supported Extreme Networks access points (Altitude 4700 Series Access Points, and Altitude 4500 series
Access Points in either Standalone AP or Virtual Controller AP mode).
NOTE
Screens and windows pictured in this guide are samples and can differ from actual screens.

Documentation Set

The documentation set for the Extreme Networks Wireless Controllers is partitioned into the following
guides to provide information for specific user needs.
Altitude® Access Point Installation Guide - Describes the basic hardware and configuration setup
●
required to transition to a more advanced configuration of the access point. The installation guide is
unique to the particular access point model purchased
Altitude Access Point System Reference Guide - (this guide) - Describes the configuration of either a
●
Standalone AP or Virtual Controller AP using the access point's initial setup wizard and resident
access point specific software.
Summit WM3000 Series Controller System Reference Guide - Describes the configuration of a Dependent
●
mode AP using the controller software.
CLI Reference Guide - Describes the commands supported by the Summit WM3000 Series Controllers
●
and Altitude Access Points that support a command line interface.
For information on managing a dependent mode AP in a controller managed network, go to
www.extremenetworks.com/go/documentation.

Document Conventions

The following conventions are used in this document to draw your attention to important information:
TM
Altitude 4000 Series Access Point System Reference Guide
About this Guide
http://
9