Fcc Rf Radiation Exposure Statement; Canada; Industry Canada Compliance Statement - Extreme Networks ExtremeWireless AP3935e Installation Manual

Warning
The ExtremeWireless AP3935 must be installed and used in strict accordance
with the manufacturer's instructions as described in this guide and related
documentation for the device to which the ExtremeWireless AP3935 is
connected. Any other installation or use of the product violates FCC Part 15
regulations.
This Part 15 radio device operates on a non-interference basis with other
devices operating at the same frequency when using the antennas provided or
other Extreme Networks-certified antennas. Any changes or modifications to
the product not expressly approved by Extreme Networks could void the user's
authority to operate this device.
For the product available in the USA market, only channels 1 to 11 can be
operated. Selection of other channels in the 2.4 GHz band is not possible.

FCC RF Radiation Exposure Statement

The ExtremeWireless AP3935 complies with FCC RF radiated exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating instructions for satisfying
RF exposure compliance. This device has been tested and has demonstrated compliance when
simultaneously operated in the 2.4 GHz and 5 GHz frequency ranges. This device must not be co‐
located or operated in conjunction with any other antenna or transmitter.
The radiated output power of the ExtremeWireless AP3935 is below the FCC radio frequency
exposure limits as specified in "Guidelines for Human Exposure to Radio Frequency
Electromagnetic Fields" (OET Bulletin 65, Supplement C). This equipment should be installed and
operated with a minimum distance of 25 cm between the radiator and your body or other co‐
located operating antennas.

Canada

Industry Canada Compliance Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus as set out in the interference‐causing equipment standard entitled "Digital Apparatus,"
ICES‐003 of Industry Canada.
Cet appareil numerique respecte les limites de bruits radioelectriques applicables aux appareils
numeriques de Classe B prescrites dans la norme sur le materiel brouilleur: "Appareils
Numeriques," NMB‐003 edictee par le Industrie Canada.
This device complies with RSS‐247 of the Industry Canada Rules. Operation is subject to the
following conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause
undesired operation.
• This Class B digital apparatus complies with Canadian ICES‐003.
• Operation in the 5150‐5250 MHz band is only for indoor usage to reduce potential for harmful
interference to co‐channel mobile satellite systems.
ExtremeWireless™ AP3935 Installation Guide 27