Lexmark X651de Service Manual page 108

7462
Error
code or
message
28x.50
x = bin
number
28x.51
x = bin
number
28x.52
x = bin
number
28x.53
x = bin
number
2-72
Service Manual
Error contents
Left tamper home
position jam
Applies to:
StapleSmart finisher
Right tamper home
position jam
Applies to:
StapleSmart finisher
Paddle control motor
timer error
Applies to:
StapleSmart finisher
Eject motor encoder
not detected
Applies to:
StapleSmart finisher
Description/Action
The left tamper home position
is not detected by the sensor
(left tamper HP)
The right tamper home position
is not detected by the sensor
(right tamper HP)
A software failure has occurred
with the output option.
The eject motor encoder is not
detected upon startup
Possible repair actions
1. Check all the connections on
the output option controller
card.
2. Check the tamper drive belt
for damage and replace if
needed.
3. Replace the left tamper
motor assembly.
"MFP stapler assembly
Go to
tamper drive motor
assembly removal" on
page 4-202.
4. Replace the sensor (tamper
HP).
Go to "MFP stapler assembly
sensor (tamper HP left and
right) removal" on
page 4-209.
4. Replace the output option if
problem remains.
1. Check all the connections on
the output option controller
card.
2. Check the tamper drive belt
for damage and replace if
needed.
3. Replace the right tamper
motor assembly.
Go to "MFP stapler assembly
tamper drive motor
assembly removal" on
page 4-202.
4. Replace the sensor (tamper
HP).
"MFP stapler assembly
Go to
tamper drive motor
assembly removal" on
page 4-202.
4. Replace the output option if
problem remains.
1. Turn the machine off/on.
2. Replace the output option if
problem remains.
1. Check all the connections on
the output option controller
card.
2. Replace the output option if
problem remains.