Lexmark X651de Service Manual page 48

7462
Error
code or
message
200.09
200.10
200.11
200.12
200.13
2-12
Service Manual
Error contents
Printhead laser start
failure
Printhead motor
synchronization error
Printhead polygon
mirror synchronization
error
Laser power signal
error
Sensor (input) static
jam
Description/Action
The printhead laser start
process failed because it did
not receive proper feedback
signal from the printhead
motor.
The printhead motor is not
synchronized when media
reaches the sensor (input).
The printhead polygon mirror
motor becomes un-
synchronized when the media
reaches the sensor (input).
The printhead laser power
signal has failed
Media remains on the sensor
(input) during the warm up
sequence.
Possible repair actions
1. Check all connections on
the printhead.
2. Check all connections on
the main drive motor
assembly.
3. Replace the main drive
motor assembly if problem
remains. Go to "Main drive
motor assembly removal
(X651, X652, X654, X656,
and X658)" on page 4-20.
1. Remove all media present
in media path.
2. Check all connections on
the printhead.
3. Check all connections on
the system card assembly.
4. Replace the printhead if
problem remains. Go to
"Printhead assembly
removal (X654, X656, and
X658)" on page 4-34.
1. Remove all media present
in media path.
2. Check all connections on
the printhead.
3. Check all connections on
the system card assembly.
4. Replace the printhead if
problem remains. Go to
"Printhead assembly
removal (X654, X656, and
X658)" on page 4-34.
1. Remove all media present
in media path.
2. Check all connections on
the printhead.
3. Check all connections on
the system card assembly.
Replace the printhead if
problem remains. Go to
"Printhead assembly
removal (X654, X656, and
X658)" on page 4-34.
4. Replace the system card if
problem remains. Go to
"System card assembly
removal (X651, X652,
X654, X656, and X658)"
on page 4-51.
Go to sensor (input) static jam
service check.
See "Sensor (input) static
jam service check" on
page 2-142.