Lexmark X651de Service Manual page 79

Error
code or Error contents
message
242.65 Pick motor load error
Source = Media tray 2
242.66 Pick motor
underspeed failure
Source = Media tray 2
Description/Action
The pick motor has failed or
caused high mechanical load
due to paper jam or bind.
The pick motor does not rotate
at the specified speed.
Possible repair actions
1. Remove all media present
in media path.
2. Ensure media tray is not
overfilled.
3. Check, clean or replace the
pick rolls for wear and
excess contamination. Go
to "Pick roll assembly
removal (X651, X652,
X654, X656, and X658)"
on page 4-31.
4. Check all connections on
the pick arm assembly.
5. Check all connections on
the system card assembly.
6. Replace the pick arm
assembly if problem
remains. Go to "Pick arm
assembly removal (X651,
X652, X654, X656, and
X658)" on page 4-29.
7. Replace system card
assembly if problem
"System
remains. Go to
card assembly removal
(X651, X652, X654, X656,
and X658)" on page 4-51.
1. Remove all media present
in media path.
2. Ensure media tray is not
overfilled.
3. Check all connections on
the pick arm assembly.
4. Check all connections on
the system card assembly.
5. Replace the pick arm
assembly if problem
remains. Go to "Pick arm
assembly removal (X651,
X652, X654, X656, and
X658)" on page 4-29.
6. Replace system card
assembly if problem
remains. Go to "System
card assembly removal
(X651, X652, X654, X656,
and X658)" on page 4-51.
Diagnostic information
7462
2-43