7462
4-bin mailbox assembly LED clear lens removal
1. Remove the 4-bin mailbox standard output bin LED. See
empty) removal" on page
2. Remove the output bin LED clear lens from the output bin LED bracket.
4-bin mailbox assembly media bin full actuator removal
1. Remove the 4-bin mailbox assembly left cover. See
page
4-213.
2. Pry the front hinge of the media bin full actuator towards the rear until the front boss is released from its
socket.
4-228
Service Manual
4-225.
"4-bin mailbox assembly left cover removal" on
"4-bin mailbox assembly sensor (mailbox