Hitachi WJ200-001S Quick Reference Manual page 21

Group "d"
Func. code display

 


Group "F"
Func. code display

 


Group "A"
Func. code display

 



Group "b"


NOTE: Pressing the [ESC] key will make the display go to the top of next function group,
regardless the display contents. (e.g.   [ESC]  )
Func. code display
SET
: Moves to
SET
Func. code display
ESC
: Jumps to the next group
ESC
SET
SET
SET
Data display
Data does not blink because of real time synchronizing
SET
: Saves the data in EEPROM
ESC
and returns to
ESC
: Returns to func. code display without saving data.
SET
SET
SET
ESC
Data display
When data is changed, the display
starts blinking, which means that
new data has not been activated yet.
: Saves the data in EEPROM and
SET
returns to
ESC : Cancels the data change and
returns to func. code display.
Press the both up and down key at the same
time in func. code or data display, then
single-digit edit mode will be enabled.
Refer to 2-34 for further information.
19
data display
.
ESC
Save
.
ESC
.
ESC
(F001 to F003)
func. code display.

ESC

ESC
func. code display.