Hitachi WJ200-001S Quick Reference Manual page 53

Func.
Name
Code

Positioning command monitor

Current position monitor

Dual monitor

Inverter mode monitor

Trip counter

Trip monitor 1

Trip monitor 2

Trip monitor 3

Trip monitor 4

Trip monitor 5

Trip monitor 6

Warning monitor

DC bus voltage monitor
 BRD load ratio monitor

Electronic thermal monitor
*1
: Up to 1000Hz for high frequency mode (b171 set to 02)
"d" Function
Description
Displays the positioning command,
range is –268435455~+268435455
Displays the current position, range
is –268435455~+268435455
Displays two
configured in  and .
Displays currently selected inverter
mode :
I-C: IM CT mode /I-V: IM VT mode
/H-I: IM High frequency mode
/P: PM mode
Number of trip events,
Range is 0. to 65530
Displays trip event information:

Error code

Output frequency at trip point

Motor current at trip point

DC bus voltage at trip point

Cumulative inverter operation
time at trip point

Cumulative power-ON time at
trip point
Displays the warning code
Voltage of inverter internal DC bus,
Range is 0.0 to 999.9
Usage ratio of integrated brake
chopper, range is 0.0 to 100.0%
Accumulated
thermal detection, range is from 0.0
to 100.0%
51
different data
value of electronic
Run
Mode Units
Edit
 
 
 
 

events
 
 
 
 
 
 
 

V

%

%