[Display Setup] - Panasonic AJ-PX380G Operating Instructions Manual

Item
[NETWORK TOOLS] [LOG DISPLAY]
[STATUS DISPLAY]
[INITIALIZE]
[PING]

[DISPLAY SETUP]

Configure the settings for the details to be displayed in the viewfinder.
These menu items cannot be set when the thumbnail screen is displayed.
Item
[ZEBRA1 DETECT]
[ZEBRA2 DETECT]
[ZEBRA2]
[CENTER MARK]
[SAFETY MARK]
[SAFETY AREA]
[FRAME MARK]
[FRAME SIG]
[FRAME LVL]
[LEVEL GAUGE]
[FOCUS BAR]
[ZOOM/FOCUS]
[LEVEL METER]
[DATE/TIME]
[REC COUNTER]
[P2CARD REMAIN]
Chapter 6 Menu Operations — Menu list
Displays the connection log.
Displays the network status.
Restores the network setting status to the factory settings.
Checks network connection using PING commands.
Sets the extraction level of zebra pattern 1.
[0%]...[109%]
f Factory setting: [70%]
Sets the extraction level of zebra pattern 2.
[0%]...[109%]
f Factory setting: [85%]
Sets on/off of zebra pattern 2 and selects the type.
[ON], [SPOT], [OFF]
f Factory setting: [SPOT]
Controls the center mark.
[1]: + (large)
[2]: Open center (large)
[3]: + (small)
[4]: Open center (small)
[OFF]: Does not display.
f Factory setting: [1]
Selects the type of frame for the safety zone marker.
[1]: Box
[2]: Corners
[OFF]: Does not display.
f Factory setting: [2]
Sets the size of the safety zone marker.
The constant ratio of length to width can be set in 1% increments.
[80%]...[100%]
f Factory setting: [90%]
Enables/disables frame marker.
[ON], [OFF]
f Factory setting: [OFF]
Sets frame marker aspect ratio.
[4:3], [13:9], [14:9], [1.85:1], [2.35:1]
f Factory setting: [4:3]
Sets the level of the outside of the frame marker.
[0]...[15]
f Factory setting: [15]
Enables/disables level gauge.
[ON], [OFF]
f Factory setting: [OFF]
Displays/hides the focus bar indicating the degree of focus.
[ON], [OFF]
f Factory setting: [OFF]
Switches the units of zoom and focus values when a serial lens is connected.
[NUMBER]: Displays position value of zoom from [000] to [999], and position value of focus from [0] to
[99].
[mm/feet]: Zoom is displayed in units of millimeters, and focus in units of feet.
[mm/m]: Zoom is displayed in units of millimeters, and focus in units of meters.
[OFF]: Neither zoom nor focus is displayed.
f Factory setting: [NUMBER]
Displays/hides audio level meter.
[ON], [OFF]
f Factory setting: [ON]
Sets date and time display.
[TIME]: Displays the hour, minute, and second.
[DATE]: Displays the year, month, and date.
[TIME&DATE]: Displays the hour, minute, and second, as well as year, month, and date.
[OFF]: Does not display.
f Factory setting: [OFF]
Sets operation of the counter for recording.
[TOTAL]: Performs continuous counting until it is reset using the <RESET> button.
[CLIP]: Clears the counter value at the start of recording and counts the time for each recording.
f Factory setting: [TOTAL]
Turns display of the remaining recording capacity for the P2 card [ON]/[OFF].
[ON], [OFF]
f Factory setting: [ON]
– 147 –
Description of settings
Description of settings