Panasonic AJ-PX380G Operating Instructions Manual page 146

Item
[SUBNET MASK]
[DEFAULT GATEWAY]
[PRIMARY DNS]
[SECONDARY DNS]
[DHCP SERVER]
[WIRELESS [MAC ADDRESS]
PROPERTY]
[TYPE]
[SSID INPUT MODE]
[SSID]
[BAND]
[CHANNEL (2.4GHz)]
[CHANNEL (5GHz)]
[ENCRYPTION]
[ENCRYPT KEY]
[DHCP]
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]
[PRIMARY DNS]
[SECONDARY DNS]
[DHCP SERVER]
[4G/LTE PROPERTY] [APN]
[USER ID]
[PASSWORD]
[DIAL NO.]
Chapter 6 Menu Operations — Menu list
Sets the subnet mask when [DISABLE] is selected in [DHCP].
f Factory setting: [255.255.255.0]
Sets the default gateway when [DISABLE] is selected in [DHCP].
f Factory setting: [192.168.0.254]
Sets the primary DNS server when [DISABLE] is selected in [DHCP].
f Factory setting: [0.0.0.0]
Sets the secondary DNS server when [DISABLE] is selected in [DHCP].
f Factory setting: [0.0.0.0]
Sets whether to use the DHCP SERVER function when connected via wired LAN. (Mutually exclusive with
[DHCP] setting)
[ENABLE]: Uses the DHCP SERVER function.
[DISABLE]: Does not use the DHCP SERVER function.
f Factory setting: [DISABLE]
Displays the MAC address of the wireless LAN of the camera. (Cannot be changed.)
Sets the connection method.
[DIRECT]: Accesses to the network function of the camera directly from a smartphone, tablet, or computer.
[INFRA]: Connects to the wireless access point.
f Factory setting: [DIRECT]
Sets the setting method of SSID. When [TYPE] in [WIRELESS PROPERTY] is set to [INFRA], this item
can be set.
[SELECT]: Selects from the access point list.
[MANUAL]: For entering the access point manually.
f Factory setting: [SELECT]
Displays network name (SSID).
f Factory setting: [AJ-PX380] (When the main menu → [NETWORK SETUP] → [WIRELESS PROPERTY]
→ [TYPE] is set to [DIRECT])
Switches between two transmission methods (2.4 GHz or 5 GHz).
[2.4GHz], [5GHz]
f Factory setting: [2.4GHz]
Sets the channels to be used when [DIRECT] is selected in [TYPE], [2.4GHz] is selected in [BAND], and
the camera is connected via wireless LAN.
[AUTO], [CH1], [CH6], [CH11]
f Factory setting: [AUTO]
Sets the channels to be used when [DIRECT] is selected in [TYPE], [5GHz] is selected in [BAND], and the
camera is connected via wireless LAN.
[AUTO], [CH36], [CH40], [CH44], [CH48]
f Factory setting: [AUTO]
Sets the encryption format used when the main menu → [NETWORK SETUP] → [WIRELESS
PROPERTY] → [TYPE] is set to [DIRECT].
[WPA-TKIP], [WPA-AES], [WPA2-TKIP], [WPA2-AES], [NONE]
f Factory setting: [WPA2-AES]
Sets the encryption key. Set the key using a string of 8 to 63 characters or a hexadecimal number with 64
digits.
The menu setting value is displayed with [*].
f Factory setting: [01234567890123456789abcdef] (When the main menu → [NETWORK SETUP] →
[WIRELESS PROPERTY] → [TYPE] is set to [DIRECT])
Sets whether to use automatic acquisition via DHCP when [INFRA] is selected in [TYPE].
[ENABLE]: Uses automatic acquisition.
[DISABLE]: Does not use automatic acquisition. Set [IP ADDRESS], [SUBNET MASK], [DEFAULT
GATEWAY], [PRIMARY DNS], and [SECONDARY DNS].
f Factory setting: [ENABLE]
Sets the IP address when [DISABLE] is selected in [DHCP].
f Factory setting: [192.168.0.1]
Sets the subnet mask when [DISABLE] is selected in [DHCP].
f Factory setting: [255.255.255.0]
Sets the default gateway when [INFRA] is selected in [TYPE] and [DISABLE] is selected in [DHCP].
f Factory setting: [192.168.0.254]
Sets the primary DNS server when [INFRA] is selected in [TYPE] and [DISABLE] is selected in [DHCP], or
when [ENABLE] is selected in [DHCP] and the primary DNS server cannot be obtained.
f Factory setting: [0.0.0.0]
Sets the secondary DNS server when [INFRA] is selected in [TYPE] and [DISABLE] is selected in [DHCP],
or when [ENABLE] is selected in [DHCP] and the primary DNS server cannot be obtained.
f Factory setting: [0.0.0.0]
Sets whether to use the DHCP SERVER function when [DIRECT] is selected in [TYPE] and the camera is
connected via wireless LAN.
[ENABLE]: Uses the DHCP SERVER function.
[DISABLE]: Does not use the DHCP SERVER function.
f Factory setting: [ENABLE]
Sets the APN (Access Point Name) provided by the provider.
Sets the user name provided by the provider.
Sets the password provided by the provider.
Sets the phone number. For details, refer to the manual of the provider you have contracted.
– 146 –
Description of settings