Mounting Accessories; Attaching A Tripod; Attaching The Shoulder Strap - Panasonic AJ-PX380G Operating Instructions Manual

Mounting accessories

Attaching a tripod

When attaching the camera to a tripod, use the tripod adaptor SHAN-TM700 (optional).
1
Mount the tripod adaptor on the tripod. (Fig. 1)
2
Mount the camera on the tripod adaptor. (Fig. 2)
Slide the camera forward along the grooves until you hear a click.
@ NOTE
t Select an appropriate hole in the adaptor, taking into account the center of gravity of the camera and tripod adaptor combined.
Also, make sure that the diameter of the selected hole matches the diameter of the pan head screw.
Removing the camera from the tripod adaptor
While holding the red lever down, move the black lever in the direction of the arrow, and slide the camera backward to remove it.
@ NOTE
t If the tripod adaptor pin does not return to its original position after the camera has been removed, hold the red lever down and move the black lever in
the direction of the arrow again, in order to return the pin to its original position.
You cannot attach it to the camera if the pin is left in the center. Be careful.

Attaching the shoulder strap

Attach to the shoulder strap fittings.
To detach the shoulder strap, first open the hooks, then detach the strap.
@ NOTE
t Make sure that the shoulder strap is securely attached.
Chapter 3 Preparation — Mounting accessories
Tripod adaptor
Pan head
Fig. 1
Red lever
Press to open the hook
Black lever
Shoulder strap
– 39 –
Fig. 2