Panasonic AJ-PX380G Operating Instructions Manual page 171

Item
[CAC MODE]
[CONNECT LENS TYPE]
[SELECT FILE TITLE]
[CAC WARNING]
[IN/OUT TERMINAL ASSIGN] screen
Display the settings of input and output terminals.
Item
[GL IN/VIDEO OUT]
[TC IN/OUT]
[SDI OUT2/IN]
Chapter 8 Display — Screen status display
Displays the operation mode of CAC.
f [AUTO]: The CAC file is automatically selected.
Displays the lens ID of the currently connected digital lens.
Displays the title and the file version of the CAC file currently used in the operation. The CAC file can be set in the main menu
→ [MAINTENANCE] → [CAC ADJ.].
Displays a warning when operation of CAC has stopped.
f [CAC LENS DATA INVALID]: This is displayed, for example, when the response data from the lens is not supported.
f [LENS INIT. NOT COMPLETED]: This is displayed, for example, when initialization of the lens cannot complete.
f [CAC FILE DATA NOT FOUND]: Displayed when the chromatic aberration compensation function is set to [ON] and the
chromatic aberration compensation data matching the connected lens.
Displays the setting status of the <GL IN/VIDEO OUT> terminal set in the main menu → [IN/OUT SEL] → [GL IN/VIDEO OUT
SEL].
[GL IN]: The terminal is set as [GENLOCK IN].
[VIDEO OUT]: The terminal is set as [VIDEO OUT].
Displays the setting status of the <TC IN/OUT> terminal set in the main menu → [IN/OUT SEL] → [TC IN/OUT SEL].
[TC IN]: The terminal is set as [TC IN].
[TC OUT]: The terminal is set as [TC OUT].
Displays the setting status of the <SDI OUT2/IN> terminal set in the main menu → [IN/OUT SEL] → [SDI OUT2/IN SEL].
[SDI OUT2]: The terminal is set as [SDI OUT2].
[SDI IN]: The terminal is set as [SDI IN].
Description
Description
– 171 –