Chapter 2 Description of parts — Power supply and accessory mounting section
15 Lens cable/microphone cable clamp (page 31)
Used for securing the lens and microphone cables.
16 <LENS> terminal (page 31)
Connect the lens connection cable. For a detailed description of the lens used, refer to the Operating Instructions for the lens.
17 Tripod mount (page 39)
Attach the tripod adaptor SHAN-TM700 (optional) when mounting the camera on the tripod.
18 Lens mount (1/3 type bayonet) (page 31)
Mount the lens.
19 Lens lever (page 31)
After mounting the lens to the lens mount, tighten the lever to secure the lens.
20 Mount cap (page 31)
Raise the lens lever to remove the cap. Replace the cap when the lens is not mounted.
– 16 –